features applications 9x11.6 mm mcm module package ingap hbt technology high efficiency 55% gsm high efficiency 50% dcs high efficiency 45% pcs low leakage current ( <10 m a) smt module package small foot print (9.2mm x 11.6mm) low profile (1.55 mm) 50 w input and output matching minimum number of external components description the awt6102 is a 3.5v power amplifier module for use in dual mode gsm/dcs/pcs wireless handsets and communication systems. gsm/dcs dual band handsets gsm/pcs dual band handsets gsm/dcs/pcs triple band handsets AWT6102M2 egsm/dcs/pcs triple band power amplifier module advanced product information rev. 2 absolute minimum and maximum ratings signal min max units supply voltage (vcc ) +7 v input power (rf in ) +15 dbm control voltage (v apc ) + 4.3v v storage temperature (t stg ) -55 150 c operating temperature (t c ) -25 85 c
2 AWT6102M2 electrical specifications egsm: (unless otherwise specified: v cc = 3.2v, z in = z out =50 w system, t c = 25 c, pulsed operation with 577 m sec pulse width and 12.5% duty cycle) parameter symbol min typ max units frequency fo 880 - 915 mhz supply voltage v cc 2.9 3.2 4.5 v control voltage range v apc 0.2 2.0 2.7 v power control current i apc 1 ma input power p in 8 10 12 dbm output power p out 34.5 - dbm power added efficiency pae 50 55 - % degraded output power v cc =2.9 v, v apc = 2.4v, p in = 8dbm, t c = 85 c 32 dbm isolation v apc = 0.2v, p in = 10 dbm -25 -35 dbm harmonics (1) 2 nd 3 rd 3fo to 12.750 ghz - - - - -12 -15 -7 -7 -7 dbm dbm dbm stability: load 8:1 vswr all phase angles - - -70 dbc ruggedness: p in = 12 dbm, v sup =4.5v, v apc = 0.2 - 2.8v 10:1 vswr all phases leakage current v apc =0v, v cc = 4.5v no input power - 10 - a noise power 925 to 935 mhz 935 to 960 mhz -72 -84 dbm/100 khz dbm/100 khz switching time v apc on to 90% detected p out 2 sec input vswr - - 2:1 output vswr 2:1 m m
3 AWT6102M2 electrical specifications dcs/pcs: (unless otherwise specified: v cc = 3.2v, z in = z out =50 w system, t c = 25 c, pulsed operation with 577 m sec pulse width and 12.5% duty cycle) parameter symbol min typ max units frequency dcs fo 1710 - 1785 mhz frequency pcs fo 1850 - 1910 mhz supply voltage v cc 2.9 3.2 4.5 v control voltage range v apc 0.2 2.0 2.7 v power control current i apc 1 ma input power p in 6 8 10 dbm output power dcs p out 31.5 - dbm output power pcs p out tbd - dbm power added efficiency (dcs) pae 45 50 - % power added efficiency (pcs) pae tbd tbd - % degraded output power (dcs/pcs) v cc =2.9 v, v apc = 2.4v, p in = 6dbm, t c = 85 c 29.5 dbm isolation v apc = 0.2v, p in = 10 dbm -30 -35 dbm harmonics (1) 2 nd 3 rd 3fo to 12.750 ghz - - - - -12 -15 -7 -7 -7 dbm dbm dbm stability: load 8:1 vswr all phase angles - - -70 dbc ruggedness: p in = 10 dbm, v sup =4.5v, v apc = 0.2 - 2.8v 10:1 vswr all phases leakage current v apc =0v, v cc = 4.5v no input power - 10 - a noise power 20 mhz offset -76 dbm/100 khz switching time v apc on to 90% detected p out 2 sec input vswr - - 2:1 output vswr - - 2:1 m m
4 AWT6102M2 schematic pin name description pin name description 1 gnd ground 9 gnd ground 2 dcs/pcs dcs/pcs rf input signal 10 egsm p out gsm rf output 3 gnd ground 11 gnd ground 4 egsm p in gsm rf input signal 12 dcs/pcs dcs/pcs rf output 5 gnd ground 13 gnd ground 6 v cc a supply voltage 14 v apc power control 7 gnd ground 15 gnd ground 8 v cc b supply voltage 16 v band (1) band select notes: 1. vband: egsm 0.0 to 0.5v dcs/pcs: 2.0 to 2.8v a b / pcs 68 pf / pcs 1 33 pf
5 AWT6102M2 package outline drawing bottom view
6 AWT6102M2 notes
7 AWT6102M2 notes
8 important notice anadigics, inc. reserves the right to make changes to its products or discontinue any product at any time without notice. the advanced product data sheets and product specifications contained in this data sheet are subject to change prior to a products formal introduction. the information in this data sheet has been carefully checked and is assumed to be reliable. however, anadigics assumes no responsibility for inaccuracies. anadigics strongly urges customers to verify that the information they are using is current before placing orders. warning anadigics products are not intended for use in life support appliances, devices, or systems. use of an anadigics product in any such application without written consent is prohibited. anadigics, inc. 35 technology drive warren, new jersey 07059 tel: (908) 668-5000 fax: (908) 668-5132 http://www.anadigics.com mktg@anadigics.com AWT6102M2
|
